One-design race shop · Keelboat

Farr 40 Race Shop

Everything you need to prepare, compete, and win.

Shopping for

Farr 40

  • 74 verified parts
  • 9 brands
  • Fit checked Nov 2026

Fit verified for Farr 40

All Farr 40 equipment

74 parts

Can’t find a part for your Farr 40? Request a Farr 40 part

Go fast

Farr 40 tuning guide

The Farr 40 is tuned with headstay turns, cap shroud and diagonal turns and a hydraulic mast-jack (ram) pressure that all change with the true wind. The only guide still publicly online is Quantum's quick tuning chart; note it reads the uppers and D1s on a Loos RT-11 gauge but the D2s on an RT-10, so the numbers in brackets are not on one scale.

Quantum Sails — Farr 40 Quick Tuning Guide 2014 (file name 2014_Farr_40_Tuning)

Written for
Not stated
Tension gauge
Loos RT-11 for the uppers and D1s; Loos RT-10 for the D2s
How it’s measured
Headstay given three ways: turns from base, and two length readings labelled 'Bail' and 'Stemplate' (units not stated, numbers read like metres). Shroud figures are full turns from base with the Loos reading in brackets. Ram pressure in psi.
Source
Quantum Sails, 2014 (file name 2014_Farr_40_Tuning)

Base setup

Base row
10–13 kn: headstay 0 turns (1.445 bail / 1.490 stemplate), uppers 0 (Loos 61), D1 0 (Loos 12), D2 0 (Loos 21), ram 3400 psi

Quick tuning chart (turns from base; Loos reading in brackets – uppers & D1 on RT-11, D2 on RT-10)

TWS (kn)Headstay (turns)Headstay (bail)Headstay (stemplate)UppersD1D2Ram (psi)
0–7−101.4731.518−3 (54)−4 (N.A)−3 (N.A)1750
7–10−71.4651.510−1 (56)−2 (N.A)−2 (N.A)2200
8–12−41.4561.501−0.5 (60)−1 (N.A)−1 (9)2650
10–1301.4451.4900 (61)0 (12)0 (21)3400
12–1451.4311.4760.5 (64)1 (22)1 (32)3900
13–16101.4171.4621 (65)2 (30)2 (40)4600
16–19121.4111.4561.5 (66)2 (30)2 (44)4900
19–22141.4051.4502 (68)3 (34)3 (47)5400
23+211.3861.4312.5335850
  • The chart's wind bands overlap (e.g. 7–10, 8–12, 10–13) as published.
  • 'N.A' is printed where the guide gives no Loos reading for that cell (it doesn't say why).
  • The units of the bail/stemplate headstay readings are not stated; they decrease as the headstay is shortened (more turns on).
  • No Loos readings are given for the 23+ row.
  • A chart only: there are no rake, prebend, spreader or sail-trim notes.

Settings are summarised from each sailmaker’s published guide (checked 2026-11-02). Use the guide written for your sails, check it against the full guide, and stay inside the class rules.

Technical

Farr 40 resource centre

How we verify parts

Fit verified
Each part listed here was matched to the Farr 40 by part number against the builder’s specification or a manufacturer’s class guide, then checked again by an independent reviewer.
Class rules
Fitting a part is not the same as it being legal for racing. Read the current Farr 40 class rules before changing equipment, and ask your class measurer if a part is not original equipment.