One-design race shop · Dinghy

Musto Skiff Race Shop

Everything you need to prepare, compete, and win.

Shopping for

Musto Skiff

  • 18 verified parts
  • 7 brands
  • Fit checked Nov 2026

Fit verified for Musto Skiff

All Musto Skiff equipment

18 parts

Can’t find a part for your Musto Skiff? Request a Musto Skiff part

Official Harken dealer

Musto Skiff deck layout

LOA
4.55 m (15 ft)
Beam
1.35 m (4.4 ft)
Beam with Racks
2.35 m (7.7 ft)
Bare Hull Weight
44 kg (97 lb)
All Up Weight
80 kg (176 lb)
Main
11.8 sq m (127 sq ft)
Gennaker
15.5 sq m (167 sq ft)

Downhaul/Cunningham

Downhaul/Cunningham — Harken layout for the Musto Skiff
Drawing: Harken
  1. 2 40mm T2™ Soft-Attach BlockHarken 2149 $44.95
  2. 3 40mm Traveler BlockHarken 2649 $49.95
  3. 4 57mm Ratchamatic® Block — SwivelHarken 2625 $121.95
  4. 5 40mm T2™ Soft-Attach BlockHarken 2149 $44.95
  5. 6 22mm BlockHarken 224 $14.95
  6. 7 16mm Eyestrap BlockHarken 442 $26.95
  7. 11 16mm BlockHarken 404 $17.95
  8. 12 16mm Eyestrap BlockHarken 442 $26.95

Vang

Vang — Harken layout for the Musto Skiff
Drawing: Harken
  1. 2 16mm Eyestrap BlockHarken 442 $26.95
  2. 3 16mm Eyestrap BlockHarken 442 $26.95
  3. 5 16mm Eyestrap BlockHarken 442 $26.95
  4. 6 16mm Eyestrap BlockHarken 442 $26.95
  5. 7 16mm Eyestrap BlockHarken 442 $26.95
  6. 8 16mm Eyestrap BlockHarken 442 $26.95
  7. 12 Standard Cam Base — Swivel, Bullseye, 365 Carbo-CamHarken 241 $93.95

Systems and part numbers as published by Harken (checked 2026-11-04). Specifications are Harken’s; class rules decide what is legal for racing.

Go fast

Musto Skiff tuning guide

The Musto Skiff class publishes the actual rig numbers of its top sailors rather than one recommended set-up: rake about 7200–7300 mm, shroud tension about 29–31 and lowers about 9–19 (the current page doesn't name the gauge; the older class guides use a Loos gauge), spreaders about 355–410 mm long with 70–120 mm deflection. Sailor weight, mast-foot position and (from 2024) the square-top main all shift the numbers, and the rake reference point differs between entries.

Musto Skiff Class Association — Rigging & Tuning – rig settings of the top performers Web page, data 2007 to 2026 Worlds

Written for
Class mainsail and asymmetric; from 2024 data is for the square-top main unless stated
Tension gauge
Not stated on the page (the 2003–2007 guide uses a metric Loos gauge)
How it’s measured
No general method given. Entries cite rake to the bottom skin of the transom, 6110 mm to the top of the gnav fitting (Bruce Keen = 7255), or a reference 1 m up from the top of the gooseneck (Jon Newman: 2155, which he thinks is 7255). Spreader length measured from the nearest point of the mast tube at the bracket; deflection from the back of the mast track (McIntosh, Hendersen).
Source
Musto Skiff Class Association, Web page, data 2007 to 2026 Worlds

Top sailors' rig settings (tensions as published; gauge not named)

SailorEventWeight (kg)HeightRake (mm)ShroudsLowersSpreader lengthSpreader deflection (mm)Mast foot
Rob Richardson (GBR)2026 Worlds 1st90185 cm72103112 (let off to 8 in wind)410 mm (max)110Standard
Eddie Bridle (GBR)2026 Worlds 2nd84185 cm723030114 holes showing100Front mast-foot hole
Ben Clegg (GBR)2026 Worlds 3rd93178 cm7275 (to bottom skin of transom)319–105 holes showing90Forward pin on mast foot
Andy Tarboton (RSA)2025 Worlds 1st87176 cm72703110410 mm903rd hole back (small gap to front of base)
Rob Richardson (GBR)2025 Worlds 2nd90185 cm72103112410 mm (max)110Standard
Eddie Bridle (GBR)2025 Worlds 6th83185 cm723030124 holes showing (not 100% sure)100Front mast-foot hole
Sam Pascoe (GBR)2024 UK Nationals 1st84188 cm72402994.5 holes showing85Normal hole
Sam Barker (GBR)2024 UK Nationals 2nd80178 cm7220309395 mm99Normal
Jon Newman (AUS)2024 AUS Nationals 1stNot given189 cm2155 (ref. 1 m above gooseneck; thinks 7255)2912375 mm70Not given
Bill Maughan (GBR)2023 UK Nationals 1st94188 cm722029/3010 day 1, 12 from day 2395 mm100Pin hole forward from base
Jamie Hilton (GBR)2019 UK Nationals 1st88printed '18' cm (5′11.5″)724030Varies 9 to 14385 mm (3.5 holes showing)110Standard
Jon Newman (AUS)2018 Worlds 1st85189 cm2155 (same reference)2912375 mm70Not given
Will Phillips (AUS)2018 Worlds 2nd86185 cm2155 (same reference)2913355 mm75Not given
Bruce Keen (GBR)2017 UK Nationals 2nd & Worlds 2nd87186 cm7255 (6110 to top of gnav fitting)2912395 mm100Not given
Andi Lachenschimid (GER)2016 Worlds 1st86186 cm73003018395 mm100Not given
Frithjof Schwerdt (GER)2016 German Open & Kieler Woche 1st80186 cm72903019 (3 mm lowers)Max (5 holes visible)110Not given
Mike Palfreman (GBR)2014 UK Nationals 2nd70179 cm72202910–12385 mm110Not given
James McIntosh (GBR)2011 UK Nationals 1st83181 cm72102912395 mm (from mast at bracket)115 (from back of mast track)Not given
Bruce Keen (GBR)2011 UK Nationals 2nd83186 cm7255 (6110 to top of gnav fitting)2912395 mm100Not given
Mike Palfreman (GBR)2011 UK Nationals 3rd73179 cm7200299390 mm100Not given
Daniel Hendersen (GBR)2011 Worlds 1st74183 cm72102911378 mm (from mast at bracket)80 (from back of mast track)Not given
Bruce Keen (GBR)2010 UK Nationals 1st83186 cm7255 (6110 to top of gnav fitting)2912395 mm100Not given
Rick Perkins (GBR)2007 UK Nationals 1st82180 cm72503012390 mm120Not given
  • These are individual sailors' settings, not a single recommendation; tension units/gauge aren't given on the page.
  • Jamie Hilton's height is printed as '18' cm on the web page; the class's 2010–2019 tuning-guide PDF gives 182 cm (5′11.5″).
  • Will Phillips' weight is 86 kg on the web page but 80 kg in the 2010–2019 PDF.
  • The 2010–2019 PDF adds two comments: Mike Palfreman (2014) suggests starting the lowers at 10 and leaving them there while learning the boat, as the stiff lower mast makes going softer of little use; in 2011 he dropped the spreaders one hole shorter once the wind passed about 12–15 kn, depending on sea state.
  • A separate class tips page ('Boat Tune Pimps', mustoskiff.com/?p=4390) gives the class-average spreader starting point as 380 length (printed '380m', presumably mm) and 115 mm deflection.

Musto Skiff Class Association — Class Tuning Guide 2003–2007 (rig settings and Ovington starting point) Data 2003–2007 (PDF posted April 2025)

Written for
Original Musto Skiff rig
Tension gauge
Metric Loos gauge (one 2003 entry quotes a 'Supaspars' gauge, as printed)
How it’s measured
Spreader length from the side of the mast to the shroud; deflection: elastic between the shrouds at the spreader ends, measured to the mast track. Rake to the lower skin of the transom (Toone, Reynolds).
Source
Musto Skiff Class Association, Data 2003–2007 (PDF posted April 2025)

Base setup

Ovington starting point, rig tension
27–30 on the Loos gauge (on a shroud), light-medium and heavy
Ovington, spreader length
Showing 2 holes on the length adjuster
Ovington, spreader angle
85–110 mm from the rear of the mast to the shroud line
Ovington, rake
5th hole down on the aft row (light–medium); 7th hole on the aft row (heavy)
Ovington, lowers
5th hole down on the front row (10 on the Loos)
Ovington, mast foot
4th hole from the front (5th on older boats)
Richard Stenhouse, March 2005
Rake 7270–7300 mm (by boat trim: rake back if bow-down, up if the transom drags); shrouds 28, lowers 10 (max 15, min 6) on the Loos; spreader sweep 110–120 mm by rake; mast heel as far forward as possible without touching the front pin

2006 settings of faster sailors (Loos)

SailorWeightRake (mm)ShroudsLowersSpreader length (mm)Deflection (mm)
Richard Stenhouse90 kg72702812?110
Ian Trotter80 kg727028–3010–12390115
Ian Renilson72 kg727030??390115
Rick Perkins74 kg72503012390120
Dan Dixon87 kg72703012??
Ant Chapman64 kg7117315–12390114

Top 5 at WYC, May 2004 (metric Loos)

SailorWeight (kg)Spreader length (cm)Deflection (mm)LowersShroudsShroud positionMast foot
Ian Trotter81381155285 down, back row5
Richard Stenhouse943912010285 down, back row4
Kev Anderson85381157305 down, back row4
Ian Turnbull9138.51058306 down, front row (Ronstan adjusters)4
Martin Boatman76381208305 down, back row4

Trim by condition

2003–2004 notes
Matt Toone (24/6/2004, 4th UK Nationals): his rake about 7410, most people about 7470 at Garda; tensions 28–30 Loos on the shrouds and 8–15 on the lowers. Update (12/1/2004): rake settled about 7300 mm (tip to lower transom skin), 28–30 shrouds, lowers 8–15 by weight and wind. Simon Reynolds 2003: shrouds and lowers 5 holes down front, 28 shrouds (Supaspars gauge, as printed), 5 lowers, rake 7280 mm, deflection 85 mm. Rick Perkins 2003: 5DF/5DF, rake 7280, prebend −5 mm, 28/5, spreaders 38 cm, deflection 11 cm.
  • The 2007 entry gives Rick Perkins' weight range as 70–82 kg (82 kg in 2007) while the 2006 table lists 74 kg.

Settings are summarised from each sailmaker’s published guide (checked 2026-11-02). Use the guide written for your sails, check it against the full guide, and stay inside the class rules.Rig tension gauges for the Musto Skiff

Technical

Musto Skiff resource centre

How we verify parts

Fit verified
Each part listed here was matched to the Musto Skiff by part number against the builder’s specification or a manufacturer’s class guide, then checked again by an independent reviewer.
Class rules
Fitting a part is not the same as it being legal for racing. Read the current Musto Skiff class rules before changing equipment, and ask your class measurer if a part is not original equipment.