One-design race shop · Dinghy

RS Venture Race Shop

Everything you need to prepare, compete, and win.

Shopping for

RS Venture

  • 22 verified parts
  • 7 brands
  • Fit checked Nov 2026

Fit verified for RS Venture

All RS Venture equipment

22 parts

Can’t find a part for your RS Venture? Request a RS Venture part

Go fast

RS Venture tuning guide

No sailmaker tuning guide exists for the RS Venture; RS Sailing's rigging manual gives the factory base setup (spreader pin holes and length, a starting shroud vernier hole) and sets rig tension with the jib-halyard tackle until the shrouds feel firm, with no gauge numbers.

RS Sailing — RS Venture Rigging Manual Rigging Manual V3 (PDF dated February 2022)

Written for
RS Venture mainsail (single-line reef), furling jib, gennaker
Tension gauge
None; tension by feel
How it’s measured
Spreader length is described by the number of adjustment holes left visible; spreader angle by the bracket and spreader pin holes.
Source
RS Sailing, Rigging Manual V3 (PDF dated February 2022)

Base setup

Spreader angle
Primary pin through the bracket's primary hole and the forward hole in the spreader; adjuster pin through bracket hole 6 and spreader hole D
Spreader length
1 adjustment hole visible
Spreader end cap
3 mm wire slot; shroud held in the forward position
Shroud vernier
The fourth hole down is a good starting point
Rig tension
Hook the rig-tension tackle to the wire loop that appears when the jib halyard is fully up and pull until the shrouds feel firm

Trim by condition

Upwind
Kicker firmly on; jib sheet fairly hard, tighter as the wind builds; sail as upright as possible.
Crew position
Sit further forward in light winds and further aft in a breeze.
Gennaker
Ease the sheet until the luff is just about to curl.
  • Builder's rigging manual, not a tuning guide: no rake, prebend or per-wind shroud settings.
  • The link is to a copy hosted by a US RS dealer, not rssailing.com.
  • Audit check: the PDF is RS Sailing's own manual (RS Sailing branding and RSsailing.com contact details; covers the Venture S and SE; 70 pages, dated 22 Feb 2022).

Settings are summarised from each sailmaker’s published guide (checked 2026-11-02). Use the guide written for your sails, check it against the full guide, and stay inside the class rules.

Technical

RS Venture resource centre

How we verify parts

Fit verified
Each part listed here was matched to the RS Venture by part number against the builder’s specification or a manufacturer’s class guide, then checked again by an independent reviewer.
Class rules
We have no current one-design class rules on file for the RS Venture. Racing legality depends on your class or handicap rules; check them before changing equipment.