One-design race shop · Keelboat
Soling Race Shop
Everything you need to prepare, compete, and win.
Fit verified for Soling
All Soling equipment
46 parts
Fit verified for Soling
Harken
Harken Swivel Cam Cleat - Base (Standard) w/ Cam-Matic 412 - Line: 8/16 to 3/8 in (8 to 10 mm)
Part # HAR403
$239.95
$272.20Fit verified for Soling
Harken
Harken Traveler Car 7/8 in (22.0 mm) - Pivoting Shackle
Part # HAR2727
$209.95
$238.65Fit verified for Soling
Harken
Harken Block - Carbo Ratchamatic 57mm Double - Standard Grip (Black)
Part # HAR2634
$325.95
$370.15Fit verified for Soling
Harken
Harken Cam Cleat - Cam-Matic 150 - Line: 1/8 to 1/2 in (3 to 12 mm)
Part # HAR150
$44.95
$50.80Fit verified for Soling
Harken
Harken Block - Classic Bullet 29mm Single - Through-Deck (Plastic)
Part # HAR088
$29.95
$33.60Fit verified for Soling
Harken
Harken Block - Classic Bullet 29mm Double - In-Line Exit (Plastic)
Part # HAR089
$46.95
$53.35Fit verified for Soling
Forte
Forte Carbon Spinnaker Pole 1 1/2 in. Dia., 10 ft. max. length (for Boats 15-21 ft.) - UXP/UXP Ends
Part # FRTFCT150
$675.00
Fit verified for Soling
Forespar
Forespar Standard Spinnaker Pole 2 in. Dia., 9 ft. 6 in. max. length (for Boats 20-25 ft.) - UXP/UXP Ends
Part # FOR304101
$816.76
$1,020.95Fit verified for Soling
Buccaneer
Buccaneer Twisted Nylon Anchor Lines - 1/2" X 150' long
Part # buc-cro-nal12150
$122.00
$123.70Fit verified for Soling
Buccaneer
Buccaneer Twisted Nylon Anchor Lines - 1/2" X 200' long
Part # buc-cro-nal12200
$161.00
$169.04Fit verified for Soling
Lewmar
Lewmar Rode - 150' 1/2"8Plt Splcd 5/16" Skl
Part # LEWHM150PX
$329.00
$498.95Fit verified for Soling
Nautalytics
Nautalytics Bulkhead Mount Compass (Digital Compass)
Part # NTL-BULKHEADMOUNT
$400.00
Fit verified for Soling
Ritchie
Ritchie Bracket Mount RitchieSport X-10W-M Compass (White Housing/Black Card)
Part # RIT-X-10W-M
$48.99
Fit verified for Soling
Ritchie
Ritchie Bracket Mount RitchieSport X-10B-M Compass (Black Housing/Black Card)
Part # RIT-X-10B-M
$51.99
Fit verified for Soling
Rooster
Rooster Tell Tales - Teflon Coated (3 Green & 3 Red)
Part # ROO127491
$8.96
$9.95Fit verified for Soling
Ronstan
Ronstan CleartStart Analogue Sailing Watch, 43mm - Unisex (Black/Red)
Part # RSGRF4056
$169.96
$199.95Fit verified for Soling
Ronstan
Ronstan CleartStart Sailing Watch, 50mm - Unisex (Black/Grey)
Part # RSGRF4055A
$101.96
$119.95Fit verified for Soling
Ronstan
Ronstan CleartStart Sailing Watch, 50mm - Unisex (Blue/Grey)
Part # RSGRF4055B
$101.96
$119.95Fit verified for Soling
Davis Instruments
Davis Universal Masthead Mount f/WindTrak 10.Sport & WindTrak 15
Part # dav-1705
$59.99
Fit verified for Soling
Ronstan
Ronstan ClearStart Sailing Watch, 40mm - Unisex (Red)
Part # RSGRF4054-RED
$84.96
$99.95Fit verified for Soling
Ronstan
Ronstan Tell Tales - Tell Tails Kit (3 Pairs)
Part # RONRF4025
$9.91
$11.66Fit verified for Soling
Ronstan
Ronstan Tell Tales - Leech Tails Kit (3 Pairs)
Part # RONRF4026
$9.91
$11.66Fit verified for Soling
Ronstan
Ronstan ClearStart Sailing Watch, 40mm - Unisex (Blue)
Part # RSGRF4054-BLU
$84.96
$99.95Fit verified for Soling
Ronstan
Ronstan CleartStart Sailing Watch, 50mm - Unisex (Red/Grey)
Part # RSGRF4055
$101.96
$119.95Fit verified for Soling
Ronstan
Ronstan ClearStart Race Timer - Unisex (Black)
Part # RSGRF4050
$118.96
$139.95Fit verified for Soling
Ronstan
Ronstan ClearStart Sailing Watch, 40mm - Unisex (Black)
Part # RSGRF4054-BLK
$84.96
$99.95
No Soling parts match these filters.
Can’t find a part for your Soling? Request a Soling part
Official Harken dealer
Soling deck layout
- LOA
- 8.15 m (27 ft)
- Beam
- 1.91 m (6 ft)
- Ballast
- 579 kg (1277 lb)
- Draft
- 1.3 m (4 ft)
- Hull Weight
- 1035 kg (2282 lb)
- Mast Height
- 9.3 m (30 ft)
- Main/Jib
- 23.7 sq m (255 sq ft)
- Jib/Genoa
- 8.1 sq m (87 sq ft)
- Spinnaker
- 35 sq m (377 sq ft)
Mainsheet
-
1
40mm Double Block — SwivelHarken 2638
$86.95 -
2
57mm T2™ Soft-Attach BlockHarken 2152
$53.95 -
3
40mm Double Block — SwivelHarken 2638
$86.95 -
4
57mm Double Ratchamatic® Block — SwivelHarken 2634
$325.95 -
5
Double Cam Base — SwivelHarken 403
$239.95
Backstay Controls
-
1
29mm Cheek BlockHarken 350
$18.95 -
2
Standard Cam-Matic® Cleat - 150Harken 150
$44.95 -
3
Standard Cam-Matic® Cleat - 150Harken 150
$44.95 -
4
Standard Cam-Matic® Cleat - 150Harken 150
$44.95 -
5
29mm Cheek BlockHarken 350
$18.95 -
6
40mm Block — SwivelHarken 2636
$38.95 -
7
40mm Block — SwivelHarken 2636
$38.95 -
8
29mm Block — SwivelHarken 340
$29.95 -
9
29mm Block — SwivelHarken 340
$29.95 -
10
40mm Fiddle Block — SwivelHarken 2655
$52.95 -
11
29mm Block — SwivelHarken 340
$29.95
Jib System
-
2
40mm Fiddle Block — SwivelHarken 2655
$52.95 -
3
29mm Block — SwivelHarken 340
$29.95 -
4
22mm Car — Pivoting ShackleHarken 2727
$209.95 -
5
29mm In-Line Exit Bullet BlockHarken 089
$46.95 -
6
29mm Through-Deck Bullet BlockHarken 088
$29.95 -
7
Standard Cam-Matic® Cleat - 150Harken 150
$44.95 -
8
29mm Through-Deck Bullet BlockHarken 088
$29.95 -
9
29mm Through-Deck Bullet BlockHarken 088
$29.95 -
10
29mm In-Line Exit Bullet BlockHarken 089
$46.95 -
11
29mm Block — SwivelHarken 340
$29.95 -
12
29mm Block — SwivelHarken 340
$29.95 -
13
29mm Block — SwivelHarken 340
$29.95
Systems and part numbers as published by Harken (checked 2026-11-04). Specifications are Harken’s; class rules decide what is legal for racing.
Go fast
Soling tuning guide
Soling tuning is about a fixed rake measured as forestay overhang, uppers and lowers set in pounds of tension, and shroud cars that move fore and aft on deck tracks with the wind, plus heavy use of the backstay. Guides differ on rake (28–31″), on the number of track positions and on the shroud loads; none names a gauge model, so check what your gauge reads in pounds before copying numbers.
North Sails — Soling Tuning Guide Undated (current web page)
- Written for
- AP-2 main with V-1 jib (0–14 kn), V-1 Turbo jib (8–20 kn) or A-1 jib (18+ kn)
- Tension gauge
- Not stated (tensions in lbs)
- How it’s measured
- Rake: hold the forestay along the front of the mast, mark it where the bottom of the mast would be, and measure from that mark to where the forestay meets the deck. Uppers set with the shrouds in the forward position and backstay on so the headstay is snug at 29″ of rake.
- Source
- North Sails, Undated (current web page)
Base setup
- Rake
- 29″ standard; 30″ in light air (under 7 kn) for feel and easier steering. Re-mark mainsheet, backstay and jib clew heights after any rake change.
- Uppers
- 700 lbs in all conditions; less on a soft mast or if the main looks flat (more upper = more prebend)
- Lowers
- 1½″ of sag at the spreaders in light air, increasing to 500 lbs at 18 kn
- Shroud track
- Five positions over 12″ of travel
- Jib traveller
- Start at 10–11″ athwartships from centreline
- Clewboard
- Third hole is the starting point for both the V-1 and the A-1 (varies by boat)
Shroud car position by wind
| Track position | Wind | Range (kn) |
|---|---|---|
| #1 full forward | Light air | 0–7 |
| #2 | Light to medium | 7–10 |
| #3 middle | Medium | 10–16 |
| #4 | Fresh | 16–20 |
| #5 full aft | Strong | 20+ |
Sail combinations
| Wind (kn) | Main | Jib |
|---|---|---|
| 0–14 | AP-2 | V-1 |
| 8–20 | AP-2 | V-1 Turbo |
| 18+ | AP-2 | A-1 |
Trim by condition
- Depowering
- Don't depower too early, especially in waves.
- Backstay
- The key Soling control: more tension flattens the main and reduces forestay sag (flatter jib). Mark it every inch.
- Mainsheet
- Top batten parallel to the boom most of the time; up to 5° to weather in flat water; open it from centreline when overpowered until the helm balances.
- Vang
- Downwind, set so the top batten is parallel to the boom. Upwind it also controls forestay sag: none in smooth water, used in chop until the helm is nearly neutral.
- Main traveller
- Boom about 4–5″ above centreline until both crew are hiked and the boat is overpowered, then centreline; rarely below.
- Jib traveller
- Out 2–4″ in 20+ kn to reduce backwinding.
- Clewboard
- Higher hole (or raise the whole jib) for a fuller foot in light air or with crew inboard; lower hole for a flatter foot when fully hiked. At full power the jib should luff evenly top to bottom.
- Jib luff
- Minimum tension, just enough to remove most scallops; more pushes the draft forward and slows the boat.
- Outhaul
- Light air about 1–1½″ from maximum; all the way out as it builds; eased to maximum (about 3″) reaching.
- Downwind
- Mast as far forward as the backstay allows; pole fore-aft so the luff is perpendicular to it; pole height so both clews are level.
- No date, author or gauge model on the page.
UK Sailmakers — UK Sailmakers Soling Tuning Guide October 2022 (PDF date; Houston loft)
- Written for
- UK Sailmakers main and medium jib (five-hole clewboard)
- Tension gauge
- Not stated (tensions in lbs)
- How it’s measured
- Rake: forestay held along the front of the mast and marked where the bottom of the mast would be; measure from the mark to the forestay/deck intersection. Shroud tension measured with the shrouds in the middle position and the backstay on so the headstay is snug at 28″ of rake.
- Source
- UK Sailmakers, October 2022 (PDF date; Houston loft)
Base setup
- Rake
- 28″; 31″ in light air (under 7 kn) for easier steering. Re-mark backstay, jib cunningham, halyard and sheets after any change.
- Uppers
- 600 lbs for 0–17 kn; 800 lbs for 18+ kn
- Lowers
- 1½″ of sag at the spreaders under sail in light air, increasing to 600 lbs at 18 kn
- Shroud track
- Three positions over 12″ of travel
- Jib traveller marks
- 10, 11 and 12″ athwartships from centreline
- Clewboard
- Middle hole or the next one up on the medium jib
Shroud car position by wind
| Track position | Wind | Range (kn) |
|---|---|---|
| 1 – full forward | Light air | 0–10 |
| 2 – middle | Medium–fresh | 10–18 |
| 4 – full aft | Heavy | 18+ |
Trim by condition
- Backstay
- Controls main fullness and forestay sag; more tension = flatter main and flatter jib. Mark the fast settings.
- Vang
- Downwind, top batten parallel to the boom; also used to control forestay sag and so jib power.
- Main traveller
- Boom on centreline to about 18 kn; above that ease it to depower.
- Top battens
- Full-length top batten above 15 kn; the old-style short batten below 15 kn.
- Jib leech
- To close the leech ease the jib tack line; to open it, tighten the tack line.
- Jib luff
- Minimum tension, just enough to remove most scallops.
- Outhaul
- About 1–1½″ from maximum in light air; all the way out as it builds.
- Go-fast tips
- Maximum crew weight, sail flat, don't pinch, set shrouds for the wind expected early in the race, pick the more powerful option when in doubt, heel to windward and steer with crew weight on runs.
- The text says three track settings but the table numbers them 1, 2 and 4.
- PDF metadata names Haye Kesteloo as author.
North Sails — Soling Tuning Guide 1995 (North Sails One Design) 1995
- Written for
- Main, V1 jib, A1 jib
- Tension gauge
- Not stated (tensions in lbs)
- How it’s measured
- Rake: forestay held along the front of the mast and marked at deck level (the mark falls on the pennant if the forestay is shorter than the mast); measure from the mark along the forestay to the deck. Shroud tension measured with the shrouds in the middle location and forestay and backstay slack.
- Source
- North Sails, 1995
Base setup
- Rake
- 28″, used in all conditions
- Spreaders
- Straight out from the mast, no forward sweep
- Uppers
- 600 lbs in all conditions
- Lowers
- ½″ sag at the spreader in light air, increasing to 600 lbs at 18 kn and 800 lbs above 22 kn
- Shroud tracks
- Separate tracks for uppers and lowers, cars moved together, 12″ total travel; lower tracks ramped ½″ steeper than the uppers
- Main traveller
- Maximum out about 10″ in 15–20 kn
- Backstay
- Marked every 2″
Shroud car position by wind
| Wind (kn) | Shroud position at deck |
|---|---|
| 0–3 | Full forward |
| 4–8 | At 3″ |
| 9–13 | Aft 6″ (mid track) |
| 13–15 | Aft 9″ |
| 16+ | Full aft |
Main controls by wind
| Wind (kn) | Outhaul | Vang | Cunningham |
|---|---|---|---|
| 0–7 | Eased 1½″ | None | None |
| 8–14 | Eased 1″ | Just enough to stop the mast pumping | Half the wrinkles out |
| 15–20 | All the way out | Just enough to stop the mast pumping | All the wrinkles out |
| 20+ | All the way out | More if needed to ease helm | Hard, to ease helm |
V1 jib
| Wind (kn) | Clew hole | Tack height | Luff tension | Jib traveller |
|---|---|---|---|---|
| 0–3 | 3 | 3″ | Big wrinkles | 12″ |
| 4–6 | 3 | 3″ | Big wrinkles | 10″ |
| 7–10 | 3 | 2.5″ | Small wrinkles | 10″ |
| 11–15 | 3 | 2″ | No wrinkles | 11.5″ |
A1 jib
| Wind (kn) | Clew hole | Tack height | Luff tension | Jib traveller |
|---|---|---|---|---|
| 10–12 | 3 | 3″ | Slight wrinkles | 10″ |
| 13–15 | 3 | 2.5″ | Just smooth | 10.5″ |
| 16–18 | 3 | 2″ | Smooth | 11″ |
| 19–22 | 3 | 1″ | Smooth | 12″ |
| 23+ | 3 | 0″ | Smooth | Down enough to … (text cut off in source) |
Trim by condition
- Mainsheet
- Up to 7 kn, top batten parallel to the boom; harder (cocked slightly to weather) in smooth water when pointing; twisted off slightly in chop. As it builds, plenty of sheet tension plus backstay to keep the forestay under control. In ideal flat water the top batten can point to weather of centreline (printed "5 8 degrees", i.e. probably 5–8°).
- Main traveller
- Boom above centreline in light air (the figure is unreadable in source) until both crew are hiking; above 8 kn drop it enough to control helm and heel, preferring more bend and twist to lowering the car. Play it in puffs above 14 kn; in steady wind use backstay and keep the car in the middle.
- Backstay
- Probably the most important Soling control: more tension flattens the main and, through the forestay, the jib.
- Jib clew
- V1: second hole from the top when new, third as it ages; A1: third hole. Adjust the lead by sliding the sail up or down the forestay rather than changing holes.
- Jib change
- Switch V1 to A1 at about 12 kn; the two overlap well from 10 to 15 kn.
- Copy hosted by Soling France (page: https://solingfrance.jimdoweb.com/le-coin-technique/réglages/version-anglaise-north); the PDF is a 2018 retyping with OCR errors. The ISA also posts this guide on soling.com (article 470, full text behind a login) with German and Portuguese versions.
- The V1 table lists hole 3 for every band although the text says to start in hole 2 on a new sail.
- The light-air boom height is garbled in this retyped copy (printed "W'"); the same sentence in Dave Curtis's 1991 article in the Soling Manual reads 4″ above centreline. The flat-water batten angle is printed "5 8 degrees", whereas the 1991 article says 5°.
- Soling France's French page (https://solingfrance.jimdoweb.com/le-coin-technique/réglages/quête/) gives a metric version: rake 28″ (70 cm), track positions 8 / 16 / 24 cm over 30 cm, lowers 272 kg at 18 kn and 362 kg at 22 kn, main traveller 25 cm in 15–20 kn.
International Soling Association (Dave Curtis) — Soling Trim, in The Soling Manual (3rd edition) Article reprinted from American Sailor, July 1991; manual 3rd edition May 1995
- Written for
- Not stated (main, jib)
- Tension gauge
- Not stated (tensions in lbs)
- How it’s measured
- Rake as forestay overhang: mark the forestay at deck level held along the mast, then measure from the mark to the deck. Shroud tension with shrouds in the middle and forestay and backstay totally slack.
- Source
- International Soling Association (Dave Curtis), Article reprinted from American Sailor, July 1991; manual 3rd edition May 1995
Base setup
- Rake
- 28″–30″ (as printed), used in all conditions
- Spreaders
- Straight out, no forward sweep
- Uppers
- 600 lbs in all conditions
- Lowers
- ½″ sag at the spreader in light air, increasing to 600 lbs at 18 kn and 800 lbs above 22 kn
- Shroud tracks
- Separate tracks for uppers and lowers, cars moved together; five settings. Total travel is printed as ½″ (evidently a misprint: the same text in North's 1995 guide reads 12″). Lower tracks ramped ½″ steeper than the uppers.
- Backstay
- Marked every 2″
- Jib traveller marks
- 10″ off centreline on the aft side of the splash rail, each side
- Headstay sag
- About 3–4″, controlled with shroud tracks and backstay
Shroud car position by wind
| Wind (kn) | Position |
|---|---|
| 0–3 (printed "0.3") | Full forward |
| 4–8 | Aft 3″ |
| 9–12 | Aft 6″ (mid-track) |
| 13–15 | Aft 9″ |
| 16+ | Full aft |
Trim by condition
- Main traveller
- Boom 4″ above centreline in light air and above centreline until both crew are hiking; above 8 kn drop it enough to control helm and heel, preferring more bend and twist. Play it in puffs over 14 kn; in steady wind use backstay and leave the car in the middle. Maximum out about 10″ in 15–20 kn.
- Mainsheet
- Top batten parallel to centreline up to 7 kn (cocked to weather in smooth water, twisted off slightly in chop); in flat water it can point 5° to weather; open it when overpowered until the helm balances.
- Vang
- Upwind only enough to stop the mast pumping; occasionally more in heavy air to reduce helm.
- Jib
- Trim so the top-batten leech telltale streams; slight luff wrinkles, then remove most of them once both crew are hiking; sheet across the 10″ mark except in very light or heavy air.
- Values were read from the scanned page image (pp. 19–20 of the manual); the PDF's OCR text layer is garbled. The setup text is essentially the same as North's 1995 guide.
- The previous version of this entry included a 'depowering order' row; that list belongs to John Bertrand's 'Bertrand on Boat Speed' column on the facing page, not to this article, and was removed.
- An unsigned column printed beside the article (p. 20) suggests about 30″ of rake measured along the forestay, the boom up to 6″ to windward until both crew are out on the rail (printed 'dropped'), and 5–10° of heel; it is not part of Curtis's setup.
- The same manual has a separate Dave Curtis outline, 'Sail Trim with the V-1 Jib' (p. 10), with a different car schedule (#1 at 0–6 kn, #2 6–10, #3 10–14, #4 14–20, #5 20+), jib car 11″ from centreline and tack 3″ off the deck; don't mix it with this table.
Settings are summarised from each sailmaker’s published guide (checked 2026-11-02). Use the guide written for your sails, check it against the full guide, and stay inside the class rules.
Technical
Soling resource centre
How we verify parts
- Fit verified
- Each part listed here was matched to the Soling by part number against the builder’s specification or a manufacturer’s class guide, then checked again by an independent reviewer.
- Class rules
- Fitting a part is not the same as it being legal for racing. Read the current Soling class rules before changing equipment, and ask your class measurer if a part is not original equipment.
- Class rulesSoling Class Rules 2025 (v.3), effective 2025-01-01 (World Sailing, status Approved)
- Class associationsoling.com
- Racing guideThe right gear for the right application
- Racing guideWhat to do when rounding the mark
- Racing guideHow to conquer the layline
- Rigging helpRequest a Soling part