One-design race shop · Dinghy
Osprey Race Shop
Everything you need to prepare, compete, and win.
Osprey parts
Tell us what your Osprey needs
We list parts for a class only after checking them against the builder’s specification and the class rules. Send us the part, position or part number and our rigging team will source it.
Go fast
Osprey tuning guide
The only openly published Osprey numbers we found are Pinnell & Bax's 2025 sheet for the Selden carbon mast: rig tension of 400–450 lb, rake measured from the masthead to the top of the transom (datum set at 20′ to the gooseneck band), 22 mm of prebend, and strut, outhaul, cunningham, board and jib-lead changes by wind. Its rake row is internally inconsistent (see note), so confirm your rake with P&B or the class before using it.
Pinnell & Bax — Osprey Tuning Guide 2025 (PB-HEADOFICEFORMS-TUNINGGUIDES-2025-OSP)
- Written for
- Not stated (P&B guide); mast Selden carbon; crew weight 170 kg
- Tension gauge
- Not named (lb)
- How it’s measured
- Rake from the tip of the mast to the top of the transom; datum: measure 20′ to the top of the gooseneck's black band. Prebend measured on the upright setting at 400 lb. Spreader A: from the line between spreader ends perpendicular to the mast track; B: mast side wall to spreader end.
- Source
- Pinnell & Bax, 2025 (PB-HEADOFICEFORMS-TUNINGGUIDES-2025-OSP)
Base setup
- Spreaders
- A 160–170 mm / B 475 mm
- Prebend
- 22 mm at 400 lb (upright setting)
Settings by wind (rig tension in lb)
| Wind (kn) | 1–4 | 5–9 | 10–15 | 16–20 | 21+ |
|---|---|---|---|---|---|
| Mast rake | 7047 mm | 7047 mm | 6081 mm | 6081–6076 mm | 6070 mm |
| Rig tension | 400 lb | 400 lb | 400 lb | 450 lb | 450 lb |
| Kicker | None | Set to maintain leech tension | 2nd top telltale stalling half the time | 2nd top telltale stalling 50% of the time | Ease to reduce power |
| Strut (from neutral) | Forward 10–15 mm | Neutral | Neutral | Ease 10 mm | Ease 15 mm |
| Outhaul | On hard | Ease 10 mm | Neutral | On hard | On hard |
| Cunningham | None | None | To remove wrinkles | Lots | As much as you can |
| Centreboard | Forward | Neutral | Up 50 mm | Up 75 mm | Up 100 mm |
| Jib fairleads | Lower line | Middle line | Middle line | Top line | Top line |
- Rake row as printed: 7047 mm (1–4 and 5–9 kn), 6081 mm (10–15), 6081–6076 mm (16–20), 6070 mm (21+). The step from 7047 to 6081 mm is 966 mm, while every other change in the row is 11 mm or less, so one group of figures is almost certainly a misprint. No other P&B or class source was found to say which; values are shown exactly as printed.
Settings are summarised from each sailmaker’s published guide (checked 2026-11-02). Use the guide written for your sails, check it against the full guide, and stay inside the class rules.
Technical
Osprey resource centre
How we verify parts
- Fit verified
- Each part listed here was matched to the Osprey by part number against the builder’s specification or a manufacturer’s class guide, then checked again by an independent reviewer.
- Class rules
- We have no current one-design class rules on file for the Osprey. Racing legality depends on your class or handicap rules; check them before changing equipment.