One-design race shop · Dinghy

RS Vision Race Shop

Everything you need to prepare, compete, and win.

Shopping for

RS Vision

  • 35 verified parts
  • 10 brands

Fit verified for RS Vision

All RS Vision equipment

35 parts

Can’t find a part for your RS Vision? Request a RS Vision part

Go fast

RS Vision tuning guide

No sailmaker tuning guide exists for the RS Vision; RS Sailing's owner's manual gives only the factory base setup (spreader pin positions and length, a starting shroud hole) and has you tension the rig with the jib-halyard tackle until the shrouds feel firm.

RS Sailing — RS Vision Owner's Manual (rigging section) Version 2 (PDF dated March 2008)

Written for
RS Vision mainsail, furling jib, gennaker
Tension gauge
None; tension by feel
How it’s measured
Spreader settings follow the Selden 'Vernier Adjust Spreader' sheet included in the manual: length is the number of adjustment holes visible, angle is set by the bracket and spreader pin holes.
Source
RS Sailing, Version 2 (PDF dated March 2008)

Base setup

Spreader primary pin
Aft spreader hole
Spreader adjuster pin
1A (bracket hole 1, spreader hole A)
Spreader end cap
Shroud in the forward position; 3.0 mm wire
Spreader length
1 hole visible
Shroud adjuster plate
The fourth hole down is a good place to start
Rig tension
Hook the rig-tension tackle to the wire loop that appears when the jib halyard is fully up and pull until the shrouds feel firm to the touch

Trim by condition

Upwind
Kicker firmly on; jib sheet fairly hard, tighter in stronger winds.
  • Builder's manual, not a tuning guide: no rake, prebend or per-wind settings.
  • The included Selden spreader sheet (595-478-E) carries the date '16-03-25'.
  • The link is to a copy hosted by a US RS dealer, not rssailing.com.
  • Audit check: the PDF is RS Sailing's own owner's manual (RS Sailing / LDC Racing Sailboats branding, rssailing.com contacts; 'RS Vision' named throughout and also covers the Vision XL; 74 pages, dated 11 Mar 2008).

Settings are summarised from each sailmaker’s published guide (checked 2026-11-02). Use the guide written for your sails, check it against the full guide, and stay inside the class rules.

Technical

RS Vision resource centre

How we verify parts

Fit verified
Each part listed here was matched to the RS Vision by part number against the builder’s specification or a manufacturer’s class guide, then checked again by an independent reviewer.
Class rules
We have no current one-design class rules on file for the RS Vision. Racing legality depends on your class or handicap rules; check them before changing equipment.