One-design race shop · Dinghy
Moth Race Shop
Everything you need to prepare, compete, and win.
Fit verified for Moth
All Moth equipment
23 parts
Fit verified for Moth
Vakaros
Vakaros Atlas Edge (High-Performance GPS Sailing Instrument)
Part # VAK-VK-EDGE
$749.00
$775.75Fit verified for Moth
Lalizas
Lalizas Cabo Floating Rope Diam. 15/64'' (6Mm), L 98,43Ft (30M), Orange
Part # LAL-94801
$14.28
Fit verified for Moth
Rooster
Rooster Tell Tales - Teflon Coated (3 Green & 3 Red)
Part # ROO127491
$8.96
$9.95Fit verified for Moth
Lalizas
Lalizas Cabo Floating Rope Diam. 20/64'' (8Mm), L 98,43Ft (30M), Orange
Part # LAL-70260
$12.46
Fit verified for Moth
Ronstan
Ronstan Tell Tales - Tell Tails Kit (3 Pairs)
Part # RONRF4025
$9.91
$11.66Fit verified for Moth
Ronstan
Ronstan Tell Tales - Leech Tails Kit (3 Pairs)
Part # RONRF4026
$9.91
$11.66Fit verified for Moth
Ronstan
Ronstan ClearStart Race Timer - Unisex (Black)
Part # RSGRF4050
$118.96
$139.95
No Moth parts match these filters.
Can’t find a part for your Moth? Request a Moth part
Official Harken dealer
Moth deck layout
- Length overall
- 3.355 m
- Beam
- 2.250 m
- Max. luff length
- 5.185 m
- Max. mast length
- 6.250 m
- Sail area
- 8 m
Mainsheet
-
2
40mm T2™ Soft-Attach BlockHarken 2149
$44.95 -
3
40mm T2™ Soft-Attach BlockHarken 2149
$44.95 -
4
16mm Forkhead BlockHarken 376
$24.95 -
5
18mm Fly Soft-Attach Double BlockHarken 2158
$42.95 -
6
16mm Double BlockHarken 406
$36.95 -
7
16mm Block — BecketHarken 405
$20.95 -
8
18mm Fly Soft-Attach BlockHarken 2698
$25.95 -
9
18mm Fly Soft-Attach BlockHarken 2698
$25.95 -
10
18mm Fly Soft-Attach BlockHarken 2698
$25.95 -
11
18mm Fly Soft-Attach BlockHarken 2698
$25.95 -
12
18mm Fly Soft-Attach BlockHarken 2698
$25.95 -
13
18mm Fly Soft-Attach BlockHarken 2698
$25.95
Systems and part numbers as published by Harken (checked 2026-11-04). Specifications are Harken’s; class rules decide what is legal for racing.
Go fast
Moth tuning guide
On the foiling Moth, 'tuning' means rig geometry (prodder and side-arm lengths, spreader deflection, shroud base, mast length), rake set by boom clearance for crossing the boat, batten tension, and vang/cunningham/outhaul for the wind, plus foil gearing and ride height. Published guides are few and give mostly geometry and qualitative trim; there are no wind-range tables, and North's guides are written for its Helix/Vi-8 sails on a 5100 mm mast.
North Sails — International Moth Speed Guide Undated web guide (Rob Greenhalgh)
- Written for
- Vi-8 LA 3Di (all-purpose) and Vi-8 DS 3Di (deck-sweeper), both for a 5100 mm mast (class sail-area limit 8.25 m²)
- Tension gauge
- Not used
- How it’s measured
- Rig numbers are from the author's own boat. Rake is set by boom clearance: 70–75 cm between boom and deck where you cross the boat.
- Source
- North Sails, Undated web guide (Rob Greenhalgh)
Base setup
- Mast length
- 5100 mm excluding top and bottom plugs (older masts 5270 or 5300 mm)
- Front prodder
- 340 (adjustable ±50 mm)
- Side arm
- 410 mm
- Deflection
- 220 mm
- Shroud base
- 1500 mm
- Back of mast to clew ring
- 2340 mm
- Rake
- As much as possible while still getting under the boom: 70–75 cm boom-to-deck where you cross
- Battens
- 1–5: just remove pocket creases; 6: remove the crease then two full clockwise turns; 7: remove creases then three turns
- Outhaul
- Rig ashore with it loose, pull max vang and max cunningham, then set the outhaul
Trim by condition
- Vang
- Reach maximum vang at about 15 kn; light air, keep vang and cunningham as loose as possible to foil early (beware over-deepening the front of the sail).
- Cunningham
- Reach maximum at about 18 kn; from about 18 kn a softer tip or a different sail is needed.
- Sail choice
- The deck-sweeper is designed around 14 kn true; sailors under 75 kg can use it all the time; heavier sailors need the all-purpose sail below about 10 kn.
- Foils
- Two foil sets (larger for light wind, smaller for strong); faster gearing for rougher water.
- Heel
- Rig always tipped to windward for stability and less leeway on the main foil; a little windward heel helps get foiling.
- North launched new-generation Helix sails in 2026 with a broader range; numbers here relate to the Vi-8 sails named in the guide.
- The prodder length is given as '340' without units in the source (mm implied by the ±50 mm adjustment).
North Sails — International Moth Tuning Guide (Helix) Undated web guide (image file names suggest 2023)
- Written for
- North International Moth Helix main (7 full-length split battens, 6 deck-sweeper battens, 13 rocket adjusters, mast cups 1–6)
- Tension gauge
- Not used
- How it’s measured
- Check batten-cup position with vang and cunningham at about 70% load.
- Source
- North Sails, Undated web guide (image file names suggest 2023)
Base setup
- Batten 1
- One or two small creases (no mast cup; two pockets on the luff tube)
- Batten 2
- One crease
- Batten 3
- Half a crease
- Battens 4–7
- No creases (batten 7 has a holder each side of the luff tube)
- Batten lengths
- May vary ±20 mm
- Covers batten and cup setup only; rig and trim numbers are in the Speed Guide.
North Sails (Dan Neri) — How to Rig a Foiling Moth 2019 (date from the page URL; no date on the page)
- Written for
- North Moth main (model not named); Mach II hull
- Tension gauge
- Not used
- How it’s measured
- Flap gap checked with a stiff ruler, wand fully forward and ride-height control in the middle of its range.
- Source
- North Sails (Dan Neri), 2019 (date from the page URL; no date on the page)
Base setup
- Main foil flap gap (Mach II)
- 7 mm starting point, wand fully forward, ride-height line mid-range
- Wand shock cord
- A little tension
- Cunningham
- Pulled tight after the boom goes on
Trim by condition
- Stepping
- Point the boat about 10° off head-to-wind; step with an adjustable headstay at its loosest (or use a longer temporary stay).
- A rigging walk-through rather than a tuning table.
Chris Williams (US Foiling Moths) — Tuning Guide 19 March 2010
- Written for
- North Moth sails (2010 era)
- Tension gauge
- Not used
- How it’s measured
- Outhaul as the gap between the foot and the boom.
- Source
- Chris Williams (US Foiling Moths), 19 March 2010
Base setup
- Vang purchase
- 16:1
Outhaul
| Condition | Foot to boom |
|---|---|
| Upwind, light | About 150 mm |
| Upwind, breeze | About 100 mm (never tighter than 100 mm) |
| Downwind | 200–250 mm |
Trim by condition
- Vang
- Moderate once foiling; very tight upwind when fully powered; maximum above about 14–15 kn true.
- Downhaul/cunningham
- Loose in marginal conditions, just leaving luff wrinkles in light air; more as the wind builds.
- Shrouds
- Tighter for power, looser when overpowered; the leeward shroud usually goes loose.
- Heel
- Flat to slightly to windward in light air, more to windward as wind increases.
- Ride height
- As high as possible upwind without ventilating the rudder; as high as you dare downwind.
- Rake
- Set with the mast-stump screw for neutral helm upwind; more rake may help upwind but hurts downwind and manoeuvres (author's comment).
- An older (2010) personal guide from the early foiling era; equipment has changed a lot since.
- A speed-target table on the page is an image we could not read.
Settings are summarised from each sailmaker’s published guide (checked 2026-11-02). Use the guide written for your sails, check it against the full guide, and stay inside the class rules.
Technical
Moth resource centre
How we verify parts
- Fit verified
- Each part listed here was matched to the Moth by part number against the builder’s specification or a manufacturer’s class guide, then checked again by an independent reviewer.
- Class rules
- Fitting a part is not the same as it being legal for racing. Read the current Moth class rules before changing equipment, and ask your class measurer if a part is not original equipment.
- Class rulesIMCA Class Rules, effective date 01/12/2024 (1 December 2024), Status: Approved
- Class associationmoth-sailing.org
- Racing guideThe right gear for the right application
- Racing guideWhat to do when rounding the mark
- Racing guideHow to conquer the layline
- Rigging helpRequest a Moth part