One-design race shop · Keelboat
Hobie 33 Race Shop
Everything you need to prepare, compete, and win.
Fit verified for Hobie 33
All Hobie 33 equipment
20 parts
Fit verified for Hobie 33
Lewmar
Lewmar Winch Handle - 8 in. / Aluminum / Single Hand Grip / Locking
Part # LEW29141011
$116.00
$170.95Fit verified for Hobie 33
Lewmar
Lewmar Winch Handle - 10 in. / Plastic - Red / Single Hand Grip / Locking / Floating
Part # LEW29145311
$79.33
$113.95Fit verified for Hobie 33
Lewmar
Lewmar Winch Handle - 10 in. / Chrome / Double Handle Grip / Locking
Part # LEW29141122
$196.00
$297.95Fit verified for Hobie 33
Harken
Harken Winch Handle - 8 in. / Chrome / Single Hand Grip / Locking
Part # HARB8CL
$126.95
$181.20Fit verified for Hobie 33
Lewmar
Lewmar Winch Handle - 10 in. / Aluminum / Single Hand Grip / Locking
Part # LEW29141111
$125.00
$184.95Fit verified for Hobie 33
Harken
Harken Winch Handle - 8 in. / Aluminum / Speed Grip / Locking
Part # HARB8ASG
$109.95
$156.85Fit verified for Hobie 33
Harken
Harken Winch Handle - 8 in. / Bronze / Single Hand Grip / Locking
Part # HARB8BL
$126.95
$180.90Fit verified for Hobie 33
Harken
Harken Winch Handle - 10 in. / Aluminum / Single Hand Grip / Locking
Part # HARB10AL
$109.95
$156.85Fit verified for Hobie 33
Lewmar
Lewmar Winch Handle - 8 in. / Plastic - Red / Single Hand Grip / Locking / Floating
Part # LEW29145301
$74.19
$104.95Fit verified for Hobie 33
Harken
Harken Winch Handle - 8 in. / Chrome / Speed Grip / Locking
Part # HARB8CSG
$145.95
$208.00Fit verified for Hobie 33
Lewmar
Lewmar Winch Handle - 10 in. / Chrome / Single Hand Grip / Locking
Part # LEW29141121
$153.00
$231.95Fit verified for Hobie 33
Harken
Harken Winch Handle - 10 in. / Chrome / Single Hand Grip / Locking
Part # HARB10CL
$148.95
$212.85Fit verified for Hobie 33
Harken
Harken Winch Handle - 10 in. / Chrome / Speed Grip / Locking
Part # HARB10CSG
$153.95
$220.15Fit verified for Hobie 33
Harken
Harken Winch Handle - 8 in. / Aluminum / Single Hand Grip / Locking
Part # HARB8AL
$94.95
$135.00Fit verified for Hobie 33
Harken
Harken Winch Handle - 8 in. / Aluminum / Ball Grip / Locking
Part # HARB8ASGLP
$106.95
$152.05Fit verified for Hobie 33
Harken
Harken Winch Handle - 10 in. / Aluminum / Double Handle Grip / Locking
Part # HARB10ADL
$182.95
$261.50Fit verified for Hobie 33
Harken
Harken Winch Handle - 10 in. / Bronze / Single Hand Grip / Locking
Part # HARB10BL
$193.95
$277.30Fit verified for Hobie 33
Harken
Harken Winch Handle - 10 in. / Aluminum / Speed Grip / Locking
Part # HARB10ASG
$124.95
$177.55
No Hobie 33 parts match these filters.
Can’t find a part for your Hobie 33? Request a Hobie 33 part
Go fast
Hobie 33 tuning guide
The Hobie 33 is set up with a fixed headstay length and upper/lower shroud tensions that step up with the wind, with headsail choice and genoa leech distance to the spreader as the main trim references. The only public sailmaker table found doesn't name its gauge or wind units, so treat its tension numbers as relative.
Sail Technologies — Hobie 33 Tuning Guidelines Current web page (undated)
- Written for
- Light #1, 135% #2, 98% blade
- Tension gauge
- Not stated
- How it’s measured
- Headstay measured from the centre of the headstay pin at the hounds to the centre of the pin at the bow.
- Source
- Sail Technologies, Current web page (undated)
Base setup
- Headstay length
- 11.07 m
- Deck to headstay attachment at the mast
- 9.17 m
Settings by wind (rig tension printed as a pair, presumably uppers/lowers; gauge and wind units not stated)
| Wind | Rig tension | Halyard tension | Distance to spreader | Sail |
|---|---|---|---|---|
| 0–5 | 30/26 | Medium | 8″ | Light #1 |
| 5–12 | 32/26 | Medium loose | 2–4″ | Light #1 |
| 12–16 | 32/28 | Medium | 2″ | 135%, #2 |
| 16–22 | 35/28 | Medium | 4″ inside spreader | 98% blade |
| 23+ | 36/31 | Tight | 2″ inside spreader | 98% blade |
- The 'Rig Tension' column gives two numbers (e.g. 30/26) without saying which shroud each is for; uppers/lowers is our reading.
- The page doesn't say which Loos model the tension numbers are for, whether the wind is true or apparent, or what 'distance to spreader' is measured from (presumably the headsail leech to the spreader tip).
- No rake, backstay or mainsail notes are given.
Settings are summarised from each sailmaker’s published guide (checked 2026-11-02). Use the guide written for your sails, check it against the full guide, and stay inside the class rules.
Technical
Hobie 33 resource centre
How we verify parts
- Fit verified
- Each part listed here was matched to the Hobie 33 by part number against the builder’s specification or a manufacturer’s class guide, then checked again by an independent reviewer.
- Class rules
- We have no current one-design class rules on file for the Hobie 33. Racing legality depends on your class or handicap rules; check them before changing equipment.