One-design race shop · Dinghy
RS Quest Race Shop
Everything you need to prepare, compete, and win.
Fit verified for RS Quest
All RS Quest equipment
17 parts
Fit verified for RS Quest
Selden
Selden Composite Sheave Box with ø35 mm Composite Sheave - Screws Included
Part # sel-505-061-02
$46.00
Fit verified for RS Quest
Selden
Selden Mast Swivel with 27 mm Cam Cleat - Composite Cams
Part # sel-433-501-01r
$52.70
$62.00Fit verified for RS Quest
Selden
Selden Bulls Eye Fairlead - C-c 25 mm, Polymer, Stainless Lining, Max Line ø10 mm - Weight 0.46 oz. (13.00 g.)
Part # sel-508-604
$11.00
Fit verified for RS Quest
Selden
Selden 30 Ball Bearing Block - Single Swivel Stand Up
Part # sel-403-101-12r
$27.20
$32.00Fit verified for RS Quest
Selden
Selden Stainless Steel Lacing Eye, C-c 26 mm
Part # sel-508-089-01
$13.00
Fit verified for RS Quest
Selden
Selden Rigging Screw - 2-P Eye Ø6, C-c 38 Stainless Steel
Part # sel-508-019
$9.00
Fit verified for RS Quest
Selden
Selden Boom Fitting - Sliding Eye, Dinghy Boom
Part # sel-511-714-02
$22.00
Fit verified for RS Quest
Selden
Selden Drop Nose Pin - Ø6 X 66, Stainless Steel
Part # sel-166-665
$27.00
Fit verified for RS Quest
Selden
Selden 40 Ball Bearing Block - Single Strap
Part # sel-404-101-02r
$29.75
$35.00Fit verified for RS Quest
Sea-Dog
Sea-Dog Poly Pro Anchor Line w/Snap - 1/4" x 100' - Yellow
Part # SDG-304206100YW-1
$15.73
$16.30Fit verified for RS Quest
Lalizas
Lalizas Cabo Floating Rope Diam. 15/64'' (6Mm), L 98,43Ft (30M), Orange
Part # LAL-94801
$14.28
Fit verified for RS Quest
Sea-Dog
Sea-Dog Poly Pro Anchor Line w/Snap - 1/4" x 50' - Yellow
Part # SDG-304206050YW-1
$9.50
$9.85Fit verified for RS Quest
Sea-Dog
Sea-Dog Poly Pro Anchor Line w/Snap - 3/8" x 75' - Yellow
Part # SDG-304210075YW-1
$27.83
$28.85Fit verified for RS Quest
Lalizas
Lalizas Cabo Floating Rope Diam. 20/64'' (8Mm), L 98,43Ft (30M), Orange
Part # LAL-70260
$12.46
No RS Quest parts match these filters.
Can’t find a part for your RS Quest? Request a RS Quest part
Go fast
RS Quest tuning guide
The RS Quest is a training and club boat with no sailmaker tuning guides; RS Sailing's rigging manual gives the factory base setup (spreader pin holes and length, shroud adjuster holes by wind) and sets rig tension with the forestay lever rather than a gauge.
RS Sailing — RS Quest Rigging Manual Rigging Manual V8 (PDF dated February 2022)
- Written for
- RS Quest standard mainsail, furling jib (spinnaker or gennaker kit optional)
- Tension gauge
- None; rig tension comes from the forestay lever
- How it’s measured
- Spreader length is described by the number of adjustment holes left visible; spreader angle by the bracket and spreader pin holes.
- Source
- RS Sailing, Rigging Manual V8 (PDF dated February 2022)
Base setup
- Spreader angle
- Primary pin through the bracket's primary hole and the aft hole in the spreader; adjuster pin through bracket hole 1 and spreader hole A
- Spreader length
- 5 adjustment holes visible
- Spreader end cap
- 3 mm wire slot; shroud held in the aft position
- Shroud adjuster
- Hole 2 or 3 in light winds; hole 4, 5 or 6 in strong winds (fit the M5 bolt and Nyloc in the top hole of the vernier when using holes 4–6)
- Rig tension
- Pull the forestay lever fully down; it should be hard to do, and if it feels loose, adjust the shrouds. Release when not in use.
Trim by condition
- Battens
- Turn the batten key until the cloth is just tight: too tight and the head won't tack in light air, too loose and the sail sets flat with wrinkles from the head.
- Builder's rigging manual, not a tuning guide: there are no rake, prebend or per-wind control settings.
- Boats built from April 2017 have neoprene vernier covers, 5 mm bolts and a jib tack hook; older boats need the Quest Upgrade Pack for the same spec.
- The link is to a copy hosted by a US RS dealer, not rssailing.com.
- Audit check: the PDF is RS Sailing's own manual (RS Sailing branding and RSsailing.com contact details; 'RS Quest' named throughout; 90 pages, InDesign file dated 7 Feb 2022).
Settings are summarised from each sailmaker’s published guide (checked 2026-11-02). Use the guide written for your sails, check it against the full guide, and stay inside the class rules.
Technical
RS Quest resource centre
How we verify parts
- Fit verified
- Each part listed here was matched to the RS Quest by part number against the builder’s specification or a manufacturer’s class guide, then checked again by an independent reviewer.
- Class rules
- We have no current one-design class rules on file for the RS Quest. Racing legality depends on your class or handicap rules; check them before changing equipment.
- Builder specificationsRS Quest on rssailing.com
- Racing guideThe right gear for the right application
- Racing guideWhat to do when rounding the mark
- Racing guideHow to conquer the layline
- Rigging helpRequest a RS Quest part